How to choose correct steel rope of elevator 1-3

Views : 1505
Author : Ctomban elevator
Update time : 2021-10-26 16:52:12
How to choose correct steel rope of elevator

The correct selection, use and maintenance of elevator traction wire rope is not only related to the safety and normal operation of the elevator, but also very important to prolong the service life.


1. Selection of elevator wire rope

The steel wire rope is composed of rope strand, rope strand and steel wire core. The elevator steel wire rope is formed by twisting a single rope strand around the rope core in a spiral shape. Generally, 50 ~ 65 high-quality carbon steel or 60Si2Mn steel wire is used. For safety, special or No. 1 steel wire is used for elevator steel wire rope, and its steel wire diameter is limited to 0.3 ~ 1.3mm. The commonly used elevator traction wire ropes are Xilu type (X type) and walington type (W type). At present, Xilu type 8 or 6-strand steel wire rope is widely used in domestic elevators, of which 8x (19) is widely used.

1.1 identification example of wire rope mark

Taking the passenger elevator with a rated load of 1000 kg as an example, the traction steel wire rope adopts 8x (19) - 16-140 right crossing, in which 8 is the number of rope strands, X is Xilu type, (19) is the number of steel wires in each rope strand, 16 is the nominal diameter (mm) of the steel wire rope, 140 is the tensile strength (kgf / mm2) of the steel wire rope, and the right crossing is that the steel wire is twisted in the right crossing direction of the rope strand and the rope strand in the rope. Domestic traction wire ropes are right handed.

1.2 rope core


The elevator steel wire rope adopts the fiber rope core with oil immersion. The rope core supports and fixes the position of the rope strand, so as to improve the contact between the rope wires, slow down the impact load, act as an oil storage pool and provide an oil source for the long-term lubrication of the steel wire rope, so as to make the steel wire lubricated well.

1.3 structure and characteristics of Xilu type (X type) steel wire rope

The cross section of the steel wire rope of Xilu elevator is 1 + 9 + 9 per share, that is, the core plus the first layer plus the second layer is composed of 19 steel wires: 1 central steel wire, ф 1.2mm, 9 inner steel wires, ф 0.6mm, 9 outer steel wires ф 1.05mm。 The outer wire diameter is larger than the inner wire diameter, so it is also called outer thick steel wire rope. Features: ① the number of inner and outer steel wires per share is the same, but the diameter is different. The outer layer is embedded in the notch of the inner layer, the twist distance of multi-layer steel wires is equal, the structure is tight and firm, and it is not easy to uncoil. The outer thick steel wire increases wear resistance and the inner thin steel wire improves flexibility, which is conducive to mutual sliding during bending, so as to improve the flexibility and service life of the steel wire rope. ② The interlayer steel wire is in parallel line contact, the steel wire rope has good fatigue resistance, the wear resistance between the steel wires is good, the contact area increases and the contact stress decreases.


2. Safety factor of traction wire rope

From the perspective of safety, elevator wire ropes are required to have a certain number and safety factor. GB7588 has specific provisions on K static: for elevators with three or more traction wire ropes, K static = 12; For elevators with two traction wire ropes, kstatic = 16. Generally, the number of wire ropes for passengers, cargo and medical elevators shall not be less than 4, and the safety factor shall be 12; There shall be at least 2 sundry ladders with a safety factor of 10.

There are two kinds of static and dynamic loads in the work of steel wire rope, but the static load is the main factor affecting the service life of steel wire rope. For the sake of calculation simplification, only the static load is calculated practically.

2.1 selection of wire rope diameter


In order to improve the strength and prolong the service life of the elevator steel wire rope, the diameter of the elevator steel wire rope is usually select according to the formula D / D ≥ 40, where D is the diameter of the steel wire rope, which is not less than 8mm; D is the diameter of traction wheel;

2.2 calculation of safety factor

Where k - safety factor of elevator wire rope;

Sp - breaking force of elevator wire rope;

M - the magnification determined by the winding method of elevator steel wire rope, M = 1 for 1:1 winding method, M = 2 for 2:1 winding method;

Q - rated load capacity of elevator;

∑W—Wj+Wg+Wp

Where wi is the dead weight of the lift car; WG is the weight of the steel wire rope between the car and the traction wheel when the car is at the lowest floor; WP is half of the tension load of the balance rope (when there is a balance compensation device).




Ctomban elevator & escalator 


 
Related News
Read More >>
How to assess Replacement / Lubricate steel rope of elevator 3-3 How to assess Replacement / Lubricate steel rope of elevator 3-3
Oct .27.2021
How to assess Replacement / Lubricate steel rope of elevator
1. How to assess Replacement . 2. 1 lubrication of steel wire rope. 2. 2 lubrication method . 2. 3 characteristics of lubricating oil
How to use/maintenance steel rope of elevator 2-3 How to use/maintenance steel rope of elevator 2-3
Oct .27.2021
How to use/maintenance steel rope of elevator
1 inspection of steel wire rope 2 wear and deformation of steel wire rope 3 condition of steel wire rope lying in rope groove 4 corrosion of elevator wire rope 5 analysis of broken wires
How to maintenace / Repair escalator handrail belt How to maintenace / Repair escalator handrail belt
Jul .22.2019
Handbook Maintenace/Repairing Escalator/ Moving Wall  Handrail Belt
How to Maintenance your elevator How to Maintenance your elevator
Mar .26.2019
How to maintenance your elevator
icon