How to use/maintenance steel rope of elevator 2-3

Views : 2459
Author : Ctomban elevator
Update time : 2021-10-27 11:01:34
How to use/maintenance steel rope of elevator

1 inspection of steel wire rope
 
The condition of elevator wire rope is directly related to the safety of equipment and passengers, which must be paid enough attention. Careful observation and careful inspection shall be carried out in the work. The inspection contents: (1) check the number, position and twist distance of broke
n wires; (2) For the thinning of wire rope diameter, in addition to visual inspection, regularly measure the rope diameter and wear with vernier caliper; (3) Check the tension of elevator steel wire rope, and the difference between the tension of each rope shall not exceed 5%; (4) Lubrication, cleaning and corrosion of steel wire rope; (5) Rope head and its combination, and whether there are other abnormalities in the whole length, such as abnormal elongation change of rope, etc.

2 wear and deformation of steel wire rope

According to the application experience, the sudden fracture of elevator steel wire rope under normal working conditions is rare, and its damage is generally gradually formed due to wear, bending fatigue, corrosion or trauma in long-term operation. Special attention shall be paid to the inspection of wear and corrosion. Wear includes wear on the surface of steel wire rope, between strands and between wires.

Mechanical wear mainly includes external uniform wear, deformation wear and internal wear, as shown in Figure 2 (please click). A is pure mechanical wear. Generally speaking, the wear of elevator wire rope is very slow because its hardness is higher than that of rope groove. However, due to the tension, groove type, slip, eccentric wear and rolling of the steel wire rope in the groove, the wear with the rope groove is uniform under normal conditions. B refers to deformation and wear, which refers to the local wear of the elevator steel wire rope in a certain section. Due to the frequent chronic displacement of the elevator steel wire rope and rope pulley or the violent vibration and impact of the elevator steel wire rope on the rope pulley, the elevator steel wire rope is locally extruded and deformed; Although the cross-sectional area of elevator steel wire has not been reduced, the steel wire material at the local extrusion has been damaged and is easy to break. C refers to internal wear. Due to the frequent bending of elevator steel wire rope, there is relative displacement between steel wires in strands, and the contact pressure between strands increases, resulting in local indentation of steel wires between adjacent strands, which will be broken due to stress concentration over time. As mentioned above, the wear and thinning of the elevator steel wire rope will reduce the cross-sectional area of the elevator steel wire in the steel wire rope and reduce its tension. In serious cases, the elevator steel wire rope shall be scrapped and replaced. According to experience, when there is an internal wire break in the elevator wire rope, the elevator wire rope can hear a "click" sound during operation.

3 condition of steel wire rope lying in rope groove

  

Check whether the working surface of the rope groove is smooth and whether the depth of the elevator steel wire rope lying in the rope groove is consistent. The method is to stick the ruler close to the outer circular surface of the traction wheel along the axial direction, and then measure the distance from the apex of the steel wire rope in the groove to the ruler. When the gap reaches 1.5mm, the vehicle shall be loaded or the rim shall be replaced.

Check whether the elevator steel wire rope falls to the bottom and slips in the rope groove. When the gap between the steel wire rope and the groove bottom is reduced to 1mm, the rope groove needs to be turned again. The rim thickness of the rope groove below the notch when the diameter of the steel wire rope is ф Not less than 13mm ф 12.5mm; When the wire rope diameter is ф Not less than 16 mm ф 15.5mm。

4 corrosion of elevator wire rope



The elevator steel wire rope will be rusted, the mechanical properties will be reduced, the steel wire diameter will become thinner and the strands will become loose, resulting in brittle fracture. This fracture is an "avalanche" fracture, which is more dangerous than ordinary broken wire or wear. Pay special attention to the corrosion of steel wire rope during maintenance, and observe carefully. If it is found that the corrosion is serious and pits have been formed or the outer steel wire of rope strand is loose, replace it no matter how much the wire is broken or the rope diameter becomes thinner; If "red oil" is found on the steel wire rope, it indicates that there is no oil in the rope core and there is rust inside, which should be paid attention to. If necessary, cut the rope head to check the internal corrosion of the steel wire rope. The method to prevent the corrosion of steel wire rope is to apply oil on the rope for protection.

5 analysis of broken wires



(1) Overload and broken wire. The fracture of elevator steel wire rope caused by overload load or impact load presents cup-shaped plastic shrinkage. Due to the high safety factor of elevator steel wire rope, this kind of broken wire is rare; (2) Fatigue fracture. The outer steel wire on the largest side of the bending procedure of the strand, the broken wire caused by metal fatigue, and the fracture shape is flush. (3) Wear and broken wires. This kind of broken wire is caused by the friction and slip between the steel wire rope and the traction wheel, which is caused by the extremely serious wear of the steel wire and occurs in the outer steel wire. The two sides of the fracture are inclined stubbles and the fracture is flat; (4) Rust and broken wire. Caused by serious corrosion. The fracture is irregular and in the shape of drill tip; (5) Cut the broken wire. It is caused by hard breaking or being hit and squeezed by large external force. The fracture is shear; (6) Kink and broken wire. This kind of broken wire rarely occurs in normal use, and only occurs when the steel wire rope is loose and causes kink. The fracture shape is flat and smooth.



Related News
Read More >>
How to assess Replacement / Lubricate steel rope of elevator 3-3 How to assess Replacement / Lubricate steel rope of elevator 3-3
Oct .27.2021
How to assess Replacement / Lubricate steel rope of elevator
1. How to assess Replacement . 2. 1 lubrication of steel wire rope. 2. 2 lubrication method . 2. 3 characteristics of lubricating oil
How to choose correct steel rope of elevator 1-3 How to choose correct steel rope of elevator 1-3
Oct .26.2021
The correct selection, use and maintenance of elevator traction wire rope is not only related to the safety and normal operation of the elevator, but also very important to prolong the service life.
How to maintenace / Repair escalator handrail belt How to maintenace / Repair escalator handrail belt
Jul .22.2019
Handbook Maintenace/Repairing Escalator/ Moving Wall  Handrail Belt
How to Maintenance your elevator How to Maintenance your elevator
Mar .26.2019
How to maintenance your elevator
icon